PHYSICAL PROPERTIES

PRODUCT	; ADHESION PROMOTED POLYESTER FILM
TYPE (CODE)	; FCEO (FOR NON-POLAR SOLVENT / ALCOHOL BASED)
MAIN USAGE	; PRINTING, COATING & METALLIZING

PROPERTIES		UNIT	TYPICAL VALUES					TEST METHOD
Average Thickness		§­	12	50	75	100		-
Tensile Strength	MD	§¸/§± psi¡¿10©ø	28 39	20 28	19 27	19 27		ASTM D-882
	TD	§¸/§± psi¡¿10©ø	26 37	23 33	21 30	21 29
Elongation at break	MD	%	131	180	195	200		ASTM D-882
	TD	%	135	130	125	135
F-5 Value	MD	§¸/§± psi¡¿10©ø	12 17	12 16	12 16	12 16		ASTM D-882
	TD	§¸/§± psi¡¿10©ø	11 16	11 16	12 16	12 16
Heat Shrinkage (in hot air)	MD	%	1.2	0.5	0.5	0.5		ASTM D-2305 (150¡É, 30 min)
	TD	%	0.0	0.5	0.5	0.5
Friction Coefficient (film/film ; in/out)	¥ìs	-	0.29	0.25	0.26	0.28		ASTM D-1894
	¥ìk	-	0.36	0.24	0.27	0.31
Wetting Tension (coated ; in)	In	dynes/cm	40	38	38	38		ASTM D-2578
	Out	dynes/cm	40	40	40	40
Haze		%	2.7	0.9	1.2	1.4		ASTM D-1003
Test Condition		¡¤Normal laboratory ambient condition ; 23¡É, 50% RH